Energisnål brandvägg

Wed Oct 25 10:09:48 CEST 2006

Ok, ska ta och räkna på det. Det blir lite andra features, jag gillar Soekris burkens 3 nätverks if, CF kort istf HD och MiniPCI. Men det går säkert att få till nått kul med en VIA...

/Joakim
(Illa att jag var så sen med att beställa 4.0...  :)

* Johan Mson Lindman (tybollt at solace.miun.se) wrote:
> On Tuesday 24 October 2006 20:15, Joakim Aronius wrote:
> > Tjena,
> >
> > Jag kör OpenBSD och är lite sugen på att bygga en liten
> > brandvägg/mailgw/WiFi AP för hemmabruk. Började räkna lite på vad en
> > Soekris skulle kosta (kd85.com) och det hamnade på cirka 4.500 inkl moms
> > vilket känns som lite mycket.
> >
> > Just nu har jag en burk som gör allt, FW/Mail/filserver/WiFi AP etc och jag
> > vill helst inte ha två gamla servrar som står och drar ström/ger värme utan
> > vill ha något litet och energisnålt.
> >
> > Finns det några alternativ?
> 
> Utan tvekan.
> VIA EPIA minit itx.
> Billiga att införskaffa, hyggligt energisnåla och framförallt, inte lika 
> pinsamt långsamma som AMD Geode-burkarna.
> 
> Sen finns dom dessutom överallt så du behöver inte beställa prylarna
> från Belgien.
> 
> Se dmesg från en av mina nedan.
> 
> 
> MVH
> J M:son Lindman
> 
> OpenBSD 4.0 (GENERIC) #1104: Fri Sep  1 11:54:27 MDT 2006
>     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 602 MHz
> cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
> real mem  = 519602176 (507424K)
> avail mem = 466042880 (455120K)
> using 4256 buffers containing 26083328 bytes (25472K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(d9) BIOS, date 03/11/04, BIOS32 rev. 0 @ 0xface0, 
> SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
> bios0: VIA Technologies, Inc. VT8623-8235
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdba4
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb10/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 5 10 11 12
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xe000 0xd0000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe0000000, 
> size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 12, address 
> 00:40:63:de:80:e4
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI 
> 0x004063, model 0x0034
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
> iic0 at viapm0
> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 10, address 
> 00:40:63:de:80:b2
> ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 
> 0x004063, model 0x0032
> skc0 at pci0 dev 20 function 0 "D-Link Systems DGE-530T A1" rev 0x11, Marvell 
> Yukon (0x1): irq 11
> sk0 at skc0 port A, address 00:0f:3d:ef:4b:f8
> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM WDG: not activated
> viasio1 at isa0 port 0x4e/2: VT1211 rev 0x02: HM: not activated WDG: not 
> activated
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> biomask ffed netmask ffed ttymask ffef
> pctr: user-level cycle counter enabled
> uplcom0 at uhub1 port 1
> uplcom0: Prolific Technology PL2303 Serial, rev 1.10/2.02, addr 2
> ucom0 at uplcom0
> uplcom1 at uhub0 port 1
> uplcom1: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
> ucom1 at uplcom1
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> _________________________________________________
> BSD Users Sweden -- BUS at stacken.kth.se
> https://lists.stacken.kth.se/mailman/listinfo/bus