Energisnål brandvägg

Wed Oct 25 19:45:35 CEST 2006

Hej,

har väl inget direkt att bidraga med än ytterligare en fråga. Hur mkt är 
hyggligt energisnål? Några få watt? Mest intresserad för att se hur stor 
skillnad man kan uppnå. Min nuvarande server här hemma drar ca 70 W.

/Kalle

Johan Mson Lindman wrote:
> On Tuesday 24 October 2006 20:15, Joakim Aronius wrote:
>   
>> Tjena,
>>
>> Jag kör OpenBSD och är lite sugen på att bygga en liten
>> brandvägg/mailgw/WiFi AP för hemmabruk. Började räkna lite på vad en
>> Soekris skulle kosta (kd85.com) och det hamnade på cirka 4.500 inkl moms
>> vilket känns som lite mycket.
>>
>> Just nu har jag en burk som gör allt, FW/Mail/filserver/WiFi AP etc och jag
>> vill helst inte ha två gamla servrar som står och drar ström/ger värme utan
>> vill ha något litet och energisnålt.
>>
>> Finns det några alternativ?
>>     
>
> Utan tvekan.
> VIA EPIA minit itx.
> Billiga att införskaffa, hyggligt energisnåla och framförallt, inte lika 
> pinsamt långsamma som AMD Geode-burkarna.
>
> Sen finns dom dessutom överallt så du behöver inte beställa prylarna
> från Belgien.
>
> Se dmesg från en av mina nedan.
>
>
> MVH
> J M:son Lindman
>
> OpenBSD 4.0 (GENERIC) #1104: Fri Sep  1 11:54:27 MDT 2006
>     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 602 MHz
> cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
> real mem  = 519602176 (507424K)
> avail mem = 466042880 (455120K)
> using 4256 buffers containing 26083328 bytes (25472K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(d9) BIOS, date 03/11/04, BIOS32 rev. 0 @ 0xface0, 
> SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
> bios0: VIA Technologies, Inc. VT8623-8235
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdba4
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb10/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 5 10 11 12
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xe000 0xd0000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe0000000, 
> size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 12, address 
> 00:40:63:de:80:e4
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI 
> 0x004063, model 0x0034
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
> iic0 at viapm0
> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 10, address 
> 00:40:63:de:80:b2
> ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 
> 0x004063, model 0x0032
> skc0 at pci0 dev 20 function 0 "D-Link Systems DGE-530T A1" rev 0x11, Marvell 
> Yukon (0x1): irq 11
> sk0 at skc0 port A, address 00:0f:3d:ef:4b:f8
> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM WDG: not activated
> viasio1 at isa0 port 0x4e/2: VT1211 rev 0x02: HM: not activated WDG: not 
> activated
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> biomask ffed netmask ffed ttymask ffef
> pctr: user-level cycle counter enabled
> uplcom0 at uhub1 port 1
> uplcom0: Prolific Technology PL2303 Serial, rev 1.10/2.02, addr 2
> ucom0 at uplcom0
> uplcom1 at uhub0 port 1
> uplcom1: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
> ucom1 at uplcom1
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> _________________________________________________
> BSD Users Sweden -- BUS at stacken.kth.se
> https://lists.stacken.kth.se/mailman/listinfo/bus
>   