Energisnål brandvägg

[Johan Mson Lindman]

On Tuesday 24 October 2006 20:15, Joakim Aronius wrote:
> Tjena,
>
> Jag kör OpenBSD och är lite sugen på att bygga en liten
> brandvägg/mailgw/WiFi AP för hemmabruk. Började räkna lite på vad en
> Soekris skulle kosta (kd85.com) och det hamnade på cirka 4.500 inkl moms
> vilket känns som lite mycket.
>
> Just nu har jag en burk som gör allt, FW/Mail/filserver/WiFi AP etc och jag
> vill helst inte ha två gamla servrar som står och drar ström/ger värme utan
> vill ha något litet och energisnålt.
>
> Finns det några alternativ?

Utan tvekan.
VIA EPIA minit itx.
Billiga att införskaffa, hyggligt energisnåla och framförallt, inte lika 
pinsamt långsamma som AMD Geode-burkarna.

Sen finns dom dessutom överallt så du behöver inte beställa prylarna
från Belgien.

Se dmesg från en av mina nedan.


MVH
J M:son Lindman

OpenBSD 4.0 (GENERIC) #1104: Fri Sep  1 11:54:27 MDT 2006
    deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 602 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem  = 519602176 (507424K)
avail mem = 466042880 (455120K)
using 4256 buffers containing 26083328 bytes (25472K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d9) BIOS, date 03/11/04, BIOS32 rev. 0 @ 0xface0, 
SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: VIA Technologies, Inc. VT8623-8235
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdba4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb10/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xe000 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe0000000, 
size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 12, address 
00:40:63:de:80:e4
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI 
0x004063, model 0x0034
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 10, address 
00:40:63:de:80:b2
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 
0x004063, model 0x0032
skc0 at pci0 dev 20 function 0 "D-Link Systems DGE-530T A1" rev 0x11, Marvell 
Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:0f:3d:ef:4b:f8
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM WDG: not activated
viasio1 at isa0 port 0x4e/2: VT1211 rev 0x02: HM: not activated WDG: not 
activated
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
uplcom0 at uhub1 port 1
uplcom0: Prolific Technology PL2303 Serial, rev 1.10/2.02, addr 2
ucom0 at uplcom0
uplcom1 at uhub0 port 1
uplcom1: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom1 at uplcom1
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302