Vettig 12" laptop att köra *BSD på.

[Tomas Svensson]

Emil Isberg wrote:
> Hej,
>
> Jag behöver skaffa mig en vettig liten laptop med ringa vikt och
> storlek. Jag hade tänkt att docka den med bildskärm och tangentbord när
> jag inte behöver transportmöjligheten så sådana möjligheter ska också
> finnas.
>
> Eftersom jag vill köra *BSD på laptopen så är jag väldigt osäker vad som
> fungerar och inte fungerar.
>   

ThinkPad X60s (som faktiskt är en 12.1", till skillnad från de flesta
tidigare förslagen i den här tråden) fungerar med FreeBSD 6.1, förutom
WLAN (och man måste använda patchar för att X och ljud ska fungera):

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p10 #1: Tue Oct  3 11:06:36 CEST 2006
    tomas at gradius:/usr/src/sys/i386/compile/SMP
ACPI APIC Table: <LENOVO TP-7B   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           L2400  @ 1.66GHz (1662.52-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8

Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 1601044480 (1526 MB)
avail memory = 1559617536 (1487 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-7B> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xee240000-0xee243fff irq 17 at device 27.0 on pci0
init 0xc587b180
pcm0: Output Streams: 4, Input Streams: 4, Bidirectional Streams: 0
pcm0: CORB Size: 256, RIRB Size: 256
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x2000-0x201f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
em0: Ethernet address: 00:16:d3:21:97:cb
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xee444000-0xee4443ff irq 19 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: SanDisk Corporation Cruzer Micro, rev 2.00/0.20, addr 2
uhub5: vendor 0x17ef product 0x1000, class 9/0, rev 2.00/0.01, addr 3
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at
device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xe4301000-0xe43017ff irq 17 at device 0.1
on pci21
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:0a:e4:06:00:15:20:0a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:e4:15:20:0a
fwe0: Ethernet address: 02:0a:e4:15:20:0a
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci21: <base peripheral> at device 0.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port
0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf
mem 0xee444400-0xee4447ff i
rq 16 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xce800-0xcf7ff,0xcf800-0xd07ff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Broadcom Corp BCM2045B, rev 2.00/1.00, addr 2
ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3
ugen2: SchlumbergerSema SchlumbergerSema Cryptoflex e-gate, rev
1.10/1.00, addr 2
ugen3: Gemplus USB SmartCard Reader, rev 1.10/1.00, addr 3
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-4083N/1.08> at ata0-master UDMA33
ad4: 76319MB <HTS541080G9SA00 MB4IC60H> at ata2-master SATA150
pcm0: <audio> at device 0:1 (no driver attached)
pcm0: <modem> at device 1:2 (no driver attached)
pcm0: Cap 441 sf e007f st 1
pcm0: Set 0:3 10
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk Cruzer Micro 0.4> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 488MB (1000944 512 byte sectors: 64H 32S/T 488C)
Trying to mount root from ufs:/dev/ad4s3a

-Tomas